A Practical Guide for Operators, Fleet Owners, and Bobcat Machine Owners
When a skid steer loses drive power, pulls to one side, or won’t move at all, the whole job stops. Drive motor failures are one of the most expensive problems on a skid steer or compact track loader — and most of them don’t happen overnight.
This guide explains:
- The most common reasons drive motors fail
- The warning signs operators should never ignore
- How to prevent early failure
- And why Totally Mechanics sells new Rexroth drive motors as a more cost‑effective option than buying through the Bobcat dealer
1. What a Drive Motor Actually Does
On a skid steer or compact track loader, the drive (or final) motor does all the heavy work of:
- Turning the sprocket
- Moving the tracks or wheels
- Controlling speed and direction on each side
When a drive motor starts to fail, you’ll see symptoms like:
- Machine pulls to one side
- Weak travel power, especially under load
- No movement on one side
- Abnormal noise from the track or wheel area
- Case drain oil that’s hot, full of debris, or flowing excessively
- Oil leaks at the motor or hub
Ignoring these early warning signs is one of the fastest ways to turn a repair into a full replacement.
2. The Most Common Causes of Skid Steer Drive Motor Failure
✔ Contamination in the Hydraulic System
Contaminated hydraulic oil is one of the leading causes of drive motor failure.
Dirt, metal, and water in the oil will:
- Damage internal bearings and pistons
- Score surfaces inside the motor
- Increase wear on seals and rotating groups
- Overheat components
Once the system is contaminated, every component in the loop (pump, valves, drive motors) is at risk. Any time a drive motor fails, the rest of the hydraulic system needs to be evaluated and cleaned — not just the motor swapped.
✔ Case Drain Problems
The case drain line allows internal leakage and pressure to safely return to tank. When that line is:
- Restricted
- Pinched
- Plugged
- Plugged case drain filters
- Or routed incorrectly
Case pressure can spike and destroy a good drive motor quickly. High case pressure will blow seals, overheat the motor, and wipe out internal components.
This is why proper case drain testing and plumbing is critical any time a motor is replaced.
✔ Running Low on Oil or Wrong Oil
Running with:
- Low hydraulic oil
- Wrong viscosity
- Oil that’s broken down from heat
…all shorten the life of the drive motor. The motor depends on clean, correct oil for lubrication and cooling. Poor oil maintenance shows up later as “mysterious” motor failures.
✔ Track & Undercarriage Problems
On compact track loaders:
- Tracks that are too tight
- Seized or failing rollers
- Bad sprockets
- Misaligned undercarriage parts
…all add extra load to the drive motor. The motor has to overcome that drag every time the machine moves, which generates unnecessary heat and stress.
A simple undercarriage inspection can add years to a drive motor’s life.
3. Bobcat Drive Motors vs Rexroth Drive Motors
Here’s the part most Bobcat owners don’t realize:
Many Bobcat drive motors are manufactured by Rexroth.
Rexroth is the original manufacturer (OEM supplier) behind many of the drive motors used in Bobcat machines. Bobcat buys these motors from Rexroth, puts its own part number and sticker on them, and sells them through the dealer network at a dealer‑level markup.
At Totally Mechanics, we buy these motors from Rexroth and sell them under the Rexroth part number instead of the Bobcat number — so you’re still getting the same OEM‑level build, without the extra dealer markup.
In simple terms:
- 📌 Rexroth builds the motor
- 📌 Bobcat buys it and resells it as a Bobcat part
- 📌 We buy from Rexroth and sell to you as a Rexroth motor
You’re not getting a “cheap aftermarket” motor — you’re getting a Rexroth‑built unit that’s designed to perform in those machines, with less markup than the dealer.
4. New Drive Motors from Totally Mechanics
When a drive motor is too far gone to repair economically, replacement is often the best choice.
Totally Mechanics supplies:
- New Rexroth drive motors for many Bobcat skid steers and compact track loaders
- Units built by the same manufacturer that builds them for OEM applications
- Motors that are a direct‑fit hydraulic match for the original system
- A more cost‑effective option than buying a “Bobcat‑branded” motor from the dealer
Just as important, we don’t just bolt on a new motor and send you down the road. We also:
- Check and flush the hydraulic system
- Inspect and verify case drain flow and pressure
- Confirm correct plumbing and routing
- Help you address any underlying issues that killed the original motor
That way, you’re not putting a brand‑new drive motor into the same conditions that destroyed the last one.
5. How to Prevent Drive Motor Failure (Practical Checklist)
Here’s a simple, practical list operators and owners can follow to extend the life of their drive motors:
Daily / Weekly:
- Watch for new leaks around the drive motor and final drive
- Take note of changes in sound — new whining, grinding, or growling
- Pay attention if the machine pulls to one side
- Check track tension and general undercarriage condition
Regular Service Intervals:
- Change hydraulic oil and filters on schedule
- Inspect and clean case drain filters or strainers if equipped
- Check planetary/final drive oil levels (if separate from the motor)
- Inspect hoses and fittings for rubbing, wear, or damage
When Something Feels “Off”:
- Don’t ignore weak travel, jerky motion, or heat around the motors
- Make sure your case drain filters are replaced per the manual
- Have hydraulic oil sampled or inspected for metal and contamination
Catching problems early is almost always cheaper than running it until it fails completely.
6. How Totally Mechanics Can Help
Whether your drive motor is just starting to act up or has already failed, Totally Mechanics can:
- Diagnose drive motor and hydraulic issues
- Inspect for contamination and underlying causes
- Replace failed motors with new Rexroth units instead of higher‑markup dealer motors
- Help you set up a maintenance approach that keeps motors alive longer
Your skid steer earns its keep when it’s moving — not when it’s parked with a failed drive motor.
We’re here to keep it moving, and when a replacement is necessary, to make that replacement as cost‑effective and long‑lasting as possible.
Need help with your machine? Call Totally Mechanics at (330) 674-6601 or contact us. We’re at 6615 County Road 189, Millersburg, Ohio, Monday–Friday 6:30 AM–4:30 PM.
Totally Mechanics is an independent heavy equipment service and parts provider. We are not affiliated with, endorsed by, or sponsored by Bobcat Company, Rexroth, or any of their subsidiaries. All trademarks and brand names are the property of their respective owners and are used for identification purposes only.

Leave a Reply